Bosch WTY88701AU Dryer Manual

The Bosch WTY88701AU is a high-efficiency heat pump dryer designed to provide optimal drying performance while being energy efficient. It features a large capacity drum, multiple drying programs, and advanced sensor technology to prevent over-drying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Heat pump technology, large capacity drum, multiple drying programs, energy-efficient operation, and advanced sensor drying.

Feature	Description
Heat Pump Technology	Uses a closed-loop system to recycle heat for efficient drying
Large Capacity Drum	Can handle up to 9 kg of laundry
Sensor Drying	Automatically detects moisture levels to prevent over-drying
Multiple Drying Programs	Includes options for cotton, synthetics, and delicate fabrics
Energy Efficiency	Rated A++ for energy efficiency

Installation

Unpack and inspect the dryer. Ensure proper ventilation and a stable surface for installation.

Connect the dryer to a power source: Ensure the voltage matches the specifications.
Position the dryer: Leave adequate space for airflow and access.
Level the dryer: Adjust the feet to ensure stability.

WARNING! Ensure proper installation to avoid hazards. Follow all safety instructions.

First-Time Setup

Power on the dryer and follow the on-screen prompts to configure settings.

Select language: Choose your preferred language from the settings menu.
Set drying preferences: Adjust settings for fabric types and drying levels.
Run a test cycle: Ensure the dryer operates correctly before regular use.

CAUTION! Ensure the dryer is properly installed before use.

Specifications

Model: Bosch WTY88701AU
Type: Heat Pump Dryer
Capacity: 9 kg
Energy Rating: A++
Dimensions: 842 mm x 598 mm x 599 mm (H x W x D)
Weight: 62 kg
Power Supply: 220-240V, 50Hz
Noise Level: 65 dB

Controls and Settings

Access the control panel to select drying programs and adjust settings. The display shows remaining time and cycle status.

Buttons: Power, Start/Pause, Program selection, Drying level adjustment.

Features include: Delay start, Child lock, and End of cycle signal.

Connecting to Power

Ensure the dryer is connected to a suitable power outlet.

Use a dedicated circuit for the dryer.
Check the power cord for damage before use.
Do not use extension cords.

Tip: Ensure the outlet is easily accessible for maintenance.

Operating the Dryer

Follow the instructions to load laundry and select the appropriate drying program.

Load laundry: Do not overload the drum.
Select program: Choose based on fabric type and desired dryness level.
Start the cycle: Press the Start button to begin drying.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Check and clean the condenser unit periodically.
Inspect the door seal for damage.

CAUTION! Unplug the dryer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and performance standards. For more information, visit the Bosch website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power supply issue	Check power connection and circuit breaker.
No heat	Blocked filter or condenser	Clean lint filter and condenser unit.
Long drying times	Overloading or incorrect settings	Reduce load size and check settings.
Unusual noise	Foreign object in drum	Check drum for items and remove.
Door does not close	Obstruction or misalignment	Check for obstructions and realign door.

Reset: Refer to the user manual for reset instructions.

Service: Contact Bosch customer support for assistance.