Bosch WTW85490GB-01 Dryer Manual

The Bosch WTW85490GB-01 is a high-efficiency condenser dryer designed to provide optimal drying performance while being energy efficient. It features a large capacity drum, various drying programs, and advanced sensor technology to prevent over-drying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, Energy-efficient technology, Multiple drying programs, Sensor drying, Anti-crease function.

Feature	Description
Large Capacity Drum	Accommodates up to 9 kg of laundry.
Energy Efficiency	Class A energy rating for lower energy consumption.
Sensor Drying	Automatically adjusts drying time based on moisture levels.
Anti-Crease Function	Reduces wrinkles by tumbling clothes after the cycle ends.
Multiple Programs	Various settings for different fabric types and drying needs.

Installation

Ensure the dryer is placed on a stable surface and connected to a suitable power supply.

Remove packaging and inspect the dryer for any damage.
Position the dryer near a power outlet and ensure proper ventilation.
Connect the drain hose if using the condensate option.
Plug the dryer into a grounded outlet.

WARNING! Ensure the dryer is level to avoid vibrations and noise during operation.

First-Time Setup

Power on the dryer and follow the on-screen prompts to set preferences.

Select preferred language and settings.
Run a test cycle to ensure proper operation.
Adjust drying programs as needed based on fabric types.

CAUTION! Do not overload the dryer; follow capacity guidelines.

Specifications

Model: Bosch WTW85490GB-01.
Drying Capacity: 9 kg.
Energy Efficiency: Class A.
Dimensions: 84.2 cm x 59.8 cm x 63.6 cm.
Weight: 50 kg.
Noise Level: 65 dB.
Power Supply: 220-240V, 50Hz.

Controls and Settings

Access the control panel to select drying programs and adjust settings.

Control Panel: Start/Pause, Program Selection, Time Delay, and Dryness Level.

Use the display to monitor cycle progress and remaining time.

Connecting Power

Ensure the dryer is connected to a suitable power outlet.

Use a dedicated circuit for the dryer.
Ensure the power cord is in good condition and properly connected.
Do not use extension cords.

Tip: Check the power supply voltage before connecting.

Operating the Dryer

Follow the instructions for loading and selecting drying programs.

Load laundry evenly in the drum.
Select the desired drying program based on fabric type.
Press Start to begin the drying cycle.
Monitor the cycle progress on the display.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Check and clean the condenser unit periodically.
Inspect the door seal for wear and tear.

CAUTION! Unplug the dryer before performing maintenance.

Regulatory Information

This dryer complies with all applicable safety standards and regulations.

For support, visit www.bosch-home.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power supply issue	Check power connection and circuit breaker.
No heat	Blocked vent	Inspect and clean the venting system.
Long drying time	Overloading	Reduce load size and select appropriate program.
Unusual noise	Foreign objects	Check drum for any items causing noise.
Wrinkled clothes	Over-drying	Adjust drying time or use anti-crease function.

Reset: Refer to the user manual for reset instructions.

Service: For assistance, contact Bosch customer service.