Bosch WTU87RH2ES Dryer Manual

The Bosch WTU87RH2ES is a high-efficiency dryer designed to provide optimal drying performance while being energy efficient. It features various drying programs, a large capacity drum, and advanced sensor technology to prevent over-drying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying programs, energy-efficient operation, and advanced sensor technology.

Feature	Description
Sensor Drying	Automatically adjusts drying time based on moisture levels
Multiple Programs	Includes cotton, synthetic, and delicate drying options
Energy Efficiency	Designed to minimize energy consumption
Large Capacity	Can handle large loads of laundry
Quiet Operation	Engineered for low noise levels during operation

Installation

Ensure proper installation for optimal performance. Follow these steps:

Choose a suitable location with adequate ventilation.
Connect to a power source following local electrical codes.
Level the dryer for stable operation.
Ensure proper drainage if using a ventless model.

WARNING! Improper installation can lead to safety hazards. Consult a professional if unsure.

First-Time Setup

Power on the dryer and follow the on-screen prompts to configure settings.

Select preferred language and drying programs.
Set up any additional features such as delayed start.
Run a test cycle to ensure proper operation.

CAUTION! Ensure all connections are secure before operating.

Specifications

Model: Bosch WTU87RH2ES
Type: Condenser Dryer
Capacity: 8 kg
Energy Rating: A++
Dimensions: 84.2 cm x 59.8 cm x 63.6 cm
Weight: 50 kg
Power Supply: 220-240V, 50Hz
Noise Level: 65 dB

Controls and Settings

Access the control panel for program selection and settings adjustment. Key controls include:

Program Selector: Choose drying programs based on fabric type.

Start/Pause Button: Begin or pause the drying cycle.

Display Panel: Shows remaining time and cycle status.

Connecting Power

Ensure the dryer is connected to a suitable power outlet. Follow these steps:

Check the voltage requirements and ensure compatibility.
Use a dedicated circuit for the dryer.
Ensure the power cord is in good condition and securely connected.

Tip: Avoid using extension cords for safety reasons.

Operating the Dryer

To operate the dryer:

Load laundry into the drum, ensuring not to overload.
Select the desired drying program.
Press the Start button to begin the drying cycle.
Monitor the display for remaining time and cycle progress.

WARNING! Do not open the door during operation to avoid injury.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean the lint filter after every use.
Check and clean the condenser unit periodically.
Inspect hoses and connections for wear and tear.

CAUTION! Unplug the dryer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For further information, refer to the user manual or contact Bosch customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check power connection and circuit breaker.
Dryer not heating	Blocked vent	Inspect and clean venting system.
Unusual noise	Foreign object in drum	Check drum for any objects and remove.
Long drying times	Overloading	Reduce load size for efficient drying.

Service: For further assistance, contact Bosch customer support.