Bosch WTR87T82GB Dryer Manual

The Bosch WTR87T82GB is a high-efficiency condenser dryer designed to provide optimal drying performance with minimal energy consumption. It features a large capacity drum, various drying programs, and advanced sensor technology to ensure your laundry is dried to perfection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying programs, energy-efficient operation, sensor drying technology, and easy-to-use control panel.

FeatureDescription
Condenser dryingEfficient drying without the need for external venting
Sensor dryingAutomatically adjusts drying time based on moisture levels
Large capacityCan handle up to 8 kg of laundry
Multiple programsIncludes programs for cotton, synthetics, and delicate fabrics
Energy efficiencyRated A++ for energy efficiency

Installation

Unpack and inspect the dryer. Ensure it is placed on a stable surface with adequate ventilation.

  1. Connect the dryer to a power source: Use a dedicated circuit to avoid overload.
  2. Ensure proper drainage: Connect the drain hose to a suitable outlet.
  3. Level the dryer: Adjust the feet to ensure it is stable and level.

WARNING! Ensure the dryer is properly installed to avoid hazards.

First-Time Setup

Power on the dryer and follow the on-screen prompts to set preferences.

  1. Select language: Choose your preferred language from the settings menu.
  2. Set drying preferences: Adjust settings for fabric types and drying levels.
  3. Run a test cycle: Ensure the dryer operates correctly before regular use.

CAUTION! Follow all setup instructions carefully to ensure safe operation.

Specifications

Controls and Settings

Access the control panel to select drying programs and adjust settings. The display shows remaining time and cycle status.

Buttons: Start/Pause, Program selection, Temperature control, and Delay start.

Connecting Power

Ensure the dryer is connected to a suitable power outlet. Use a surge protector if necessary.

  1. Check voltage: Ensure it matches the dryer’s requirements.
  2. Plug in the dryer: Ensure the connection is secure.
  3. Test operation: Run a short cycle to confirm power supply.

Tip: Avoid using extension cords for safety reasons.

Operating the Dryer

Load the dryer with laundry, select the desired program, and start the cycle.

  1. Load laundry: Do not overload the drum for optimal drying.
  2. Select program: Use the control panel to choose the appropriate drying cycle.
  3. Start the dryer: Press the Start/Pause button to begin.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity of the dryer.

  1. Clean the lint filter after every use.
  2. Check and clean the condenser unit regularly.
  3. Inspect hoses and connections for wear or damage.

CAUTION! Always unplug the dryer before performing maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
Dryer won't startPower supply issueCheck power connection and circuit breaker.
No heatBlocked filterClean the lint filter and check the condenser.
Long drying timeOverloadingReduce load size for better airflow.
Unusual noiseForeign objectCheck drum for any objects causing noise.

Reset: Refer to the manual for reset instructions if necessary.

Service: Contact Bosch customer service for assistance.

Bosch WTR87T82GB Dryer Manual © - All Rights Reserved 2026