Bosch WTR87T82GB-03 Dryer Manual

The Bosch WTR87T82GB-03 is a high-efficiency condenser dryer designed to provide optimal drying performance while being energy efficient. It features multiple drying programs, a large capacity drum, and advanced sensor technology to prevent over-drying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying programs, sensor drying technology, and energy-efficient design.

Feature	Description
Condenser Technology	Efficient drying without external venting
Sensor Drying	Automatically adjusts drying time based on moisture levels
Large Capacity	Can handle up to 8 kg of laundry
Multiple Programs	Various settings for different fabric types
Energy Efficiency	Rated A++ for energy consumption

Installation

Ensure the dryer is placed on a stable surface and has adequate ventilation.

Unpack the dryer and inspect for any damage.
Connect the power supply to a suitable outlet.
Ensure the water tank is properly installed.
Check for proper drainage if using a drain hose.

WARNING! Ensure the dryer is level to avoid vibrations during operation.

First-Time Setup

Power on the dryer and select the desired drying program.

Set the language preference in the settings menu.
Adjust the drying level according to fabric type.
Run a test cycle to ensure proper operation.

CAUTION! Do not overload the dryer for optimal performance.

Specifications

Model: Bosch WTR87T82GB-03.
Type: Condenser Dryer.
Capacity: 8 kg.
Energy Rating: A++.
Dimensions: 84.2 cm x 59.8 cm x 65.2 cm.
Weight: 50 kg.
Noise Level: 65 dB.

Controls and Settings

Access the control panel to select drying programs and settings.

Buttons: Power, Start/Pause, Program selection, and Drying level adjustment.

Display: LED indicators for program status and remaining time.

Connecting Power

Ensure the dryer is connected to a suitable power outlet.

Use a dedicated circuit for the dryer.
Check voltage requirements before connecting.
Ensure the power cord is not damaged.

Tip: Always unplug the dryer when not in use.

Operating the Dryer

Follow the instructions to operate the dryer effectively.

Load laundry into the drum without overloading.
Select the appropriate drying program.
Press Start to begin the drying cycle.
Monitor the drying process via the display.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Empty the water tank regularly.
Check and clean the condenser unit periodically.

CAUTION! Always unplug the dryer before performing maintenance.

Regulatory Information

This dryer complies with all relevant safety and performance standards. For support, visit the Bosch website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	No power	Check power supply and connections.
No heat	Blocked vent	Clean lint filter and check venting.
Long drying times	Overloading	Reduce load size for better efficiency.
Unusual noise	Foreign object	Check drum for any objects.
Water tank full indicator on	Tank not emptied	Empty the water tank and reset.

Reset: Refer to the user manual for reset instructions.

Service: For assistance, contact Bosch customer service.