Bosch WTN852C7SN Dryer Manual

The Bosch WTN852C7SN is a high-efficiency condenser dryer designed to provide optimal drying performance while being energy efficient. It features a large capacity drum, multiple drying programs, and advanced sensor technology to prevent over-drying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying programs, energy-efficient operation, and advanced sensor technology.

Feature	Description
Condenser drying	Efficient drying without external venting
Sensor drying	Automatically adjusts drying time based on moisture levels
Multiple programs	Various settings for different fabric types
Large capacity	Can handle up to 7 kg of laundry
Quiet operation	Designed for minimal noise during operation

Installation

Unpack and inspect the dryer. Ensure proper ventilation and drainage.

Position the dryer in a well-ventilated area.
Connect the power supply according to the manual.
Ensure the water container is properly installed.
Level the dryer using adjustable feet.

WARNING! Ensure the dryer is stable and secure before use.

First-Time Setup

Power on the dryer; follow the on-screen prompts.

Select the desired language on the display.
Set the preferred drying program.
Adjust any additional settings as needed.

CAUTION! Ensure the dryer is properly connected to power before use.

Specifications

Dryer Type: Condenser dryer.
Capacity: 7 kg.
Energy Efficiency: A++ rating.
Dimensions: 84.2 cm x 59.8 cm x 63.6 cm.
Noise Level: 65 dB.
Programs: 15 drying programs including cotton, synthetics, and delicate.
Power Supply: 220-240V, 50Hz.

Controls and Settings

Access the control panel to select drying programs and settings. The display shows remaining time and program status.

Buttons: Start/Pause, Program selection, Temperature settings, Delay start.

Connecting Power

Ensure the dryer is connected to a suitable power outlet.

Check the power supply voltage.
Use the provided power cord for connection.
Ensure the outlet is grounded.

Tip: Avoid using extension cords.

Operating the Dryer

Load laundry into the drum and select the desired program.

Press the Start button to begin the drying cycle.
Monitor the display for remaining time.
Once complete, remove laundry promptly.

WARNING! Do not overload the dryer; follow load capacity guidelines.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Empty the water container regularly.
Inspect and clean the condenser unit periodically.

CAUTION! Unplug the dryer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For support, visit www.bosch-home.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power supply issue	Check power connection and outlet.
No heat	Blocked lint filter	Clean the lint filter.
Long drying time	Overloaded drum	Reduce load size.
Unpleasant odor	Dirty condenser	Clean the condenser unit.

Reset: Refer to the manual for reset instructions.

Service: For assistance, contact Bosch customer service.