Bosch WTL 6507 Dryer Manual

The Bosch WTL 6507 is a compact and efficient dryer designed for optimal performance. With a capacity of 7 kg, it is perfect for small households. This dryer features multiple drying programs, including cotton, synthetic, and delicate cycles, ensuring that your laundry is treated with care. The appliance is equipped with a heat pump technology that not only saves energy but also protects your clothes from overheating. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Compact design, multiple drying programs, heat pump technology, user-friendly interface.

Installation

Unpack and inspect the dryer. Ensure proper ventilation and drainage.

1. Place the dryer on a stable surface.
2. Connect the dryer to a power source.
3. Ensure the venting system is properly installed.
4. Check for any leaks in the drainage system.

WARNING! Ensure the dryer is level to avoid vibrations during operation.

First-Time Setup

Power on the dryer and follow the on-screen prompts.

1. Select the desired drying program using the control panel.
2. Set the drying time or select automatic drying.
3. Load the dryer with laundry, ensuring not to overload.
4. Press the start button to begin the drying cycle.

CAUTION! Do not overload the dryer to ensure optimal performance.

Specifications

• Dryer Type: Heat Pump Dryer.
• Capacity: 7 kg.
• Energy Efficiency: A++ rating.
• Dimensions: 84.2 cm x 59.8 cm x 59.9 cm.
• Weight: 50 kg.
• Noise Level: 65 dB.
• Power Supply: 220-240V, 50Hz.
• Operating Temperature: Standard room temperature.

Controls and Settings

Access the control panel for program selection and settings adjustment. The panel includes buttons for power, program selection, and drying time.

Display: LED indicators for program status and remaining time.

Settings include temperature control, drying level, and delay start options.

Connecting Power

Ensure the dryer is connected to a suitable power outlet.

1. Check the voltage requirements before connecting.
2. Use a dedicated circuit for the dryer.
3. Ensure the power cord is in good condition.

Tip: Always unplug the dryer when not in use for safety.

Operating the Dryer

To operate the dryer, load the laundry, select the desired program, and press start.

1. Load the dryer without exceeding the maximum capacity.
2. Select the appropriate drying program based on fabric type.
3. Press the start button to begin the drying process.
4. Monitor the drying cycle via the LED display.

WARNING! Do not open the door during operation.

Maintenance

Regular maintenance is essential for optimal performance.

1. Clean the lint filter after every use.
2. Check and clean the condenser unit periodically.
3. Inspect the drainage system for blockages.

CAUTION! Always unplug the dryer before performing maintenance.

Care & Cleaning

Unplug the dryer before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Do not use abrasive cleaners or solvents.

Regulatory Information

This dryer complies with all relevant safety standards and regulations. For support, visit www.bosch-home.com or contact customer service.

Troubleshooting

Reset: Unplug the dryer for 5 minutes to reset.

Service: For service inquiries, contact Bosch customer support.